{"product_id":"jbl-ivx-587140-intellivox-dsx430-column-speaker-with-16-channel-class-d-amplifier-amp-at-bottom","title":"JBL IVX-587140 Intellivox DSX430 Column Speaker with 16 Channel Class-D Amplifier (Amp at Bottom)","description":"\u003ch2\u003eJBL IVX-587140 Intellivox DSX430 Column Speaker with 16 Channel Class-D Amplifier (Amp at Bottom)\u003c\/h2\u003e \u003cp\u003eThe Intellivox DSX430 is the second tallest of Duran Audio's fully integrated digitally controlled loudspeaker arrays. A single Intellivox-DSX430 is capable of covering an area of up to 50 m while maintaining an even sound pressure level. Its array length not only offers long throw capability but also extended control at lower frequencies, making it ideally suited to highly reverberant environments. The thirteen, custom designed, 4\" loudspeakers and eight 1\" dome tweeters are driven by a sixteen channel class-D amplifier, powered by a sophisticated switched mode power supply, all of which combine to ensure years of reliable operation.\u003c\/p\u003e \u003cp\u003eThe dome tweeters in the DSX units not only improve the horizontal coverage at high frequencies but also enhance the subjective sound quality of the system for both speech and music.\u003c\/p\u003e \u003cp\u003eAn extensive set of surveillance functions have also been implemented to meet the stringent demands of typical Voice Alarm (life safety) applications.\u003c\/p\u003e \u003cp\u003eThe unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing, pre-sets and surveillance features. The increased lower frequency control offered by the array makes the Intellivox-DSX430 suitable for easy and unobtrusive implementation in highly reverberant and architecturally sensitive environments. The low frequency response of the system can be easily extended using a JBL sub woofer system.\u003c\/p\u003e \u003ch3\u003eFeatures:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSuperb Speech Intelligibility\u003c\/li\u003e \u003cli\u003eSlim Unobtrusive Design\u003c\/li\u003e \u003cli\u003eExtended Frequency Response - up to 18kHz\u003c\/li\u003e \u003cli\u003eHigher Fidelity\u003c\/li\u003e \u003cli\u003eWide Horizontal Dispersion\u003c\/li\u003e \u003cli\u003eVertical Beam Shaping (DDS Technology)\u003c\/li\u003e \u003cli\u003e32-bit floating point DSP\u003c\/li\u003e \u003cli\u003eControl of Vertical Beam Shaping\u003c\/li\u003e \u003cli\u003eDual Line Inputs\u003c\/li\u003e \u003cli\u003eVolume Control\u003c\/li\u003e \u003cli\u003eDelay (up to 20 seconds)\u003c\/li\u003e \u003cli\u003e8 band parametric EQ\u003c\/li\u003e \u003cli\u003e8 user definable, password protected presets on board (recallable through third party control devices)\u003c\/li\u003e \u003cli\u003eAVC (Automatic Volume Control) via build-in ambient mic.\u003c\/li\u003e \u003cli\u003eUpgradeable firmware\u003c\/li\u003e \u003cli\u003eNetwork Ready\u003c\/li\u003e \u003cli\u003eIntegral Surveillance\u003c\/li\u003e \u003cli\u003eSimulation via DDA, Catt-Acoustic, Odeon and EASE4.3\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAcoustical: \u003cul\u003e \u003cli\u003eFrequency range: \u003cul\u003e \u003cli\u003e4\" loudspeaker: 230 - 10k Hz (+\/-3 dB)\u003c\/li\u003e \u003cli\u003eHorn loaded dome tweeter: 2k - 18k Hz (+\/-3 dB)\u003c\/li\u003e \u003cli\u003eComplete array: 130 - 20k Hz (+\/-3 dB)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eMax SPL: \u003cul\u003e \u003cli\u003eContinuous: 91 dB SPL (A-weighted at 30 m)\u003c\/li\u003e \u003cli\u003ePeak: 94 dB SPL (A-weighted at 30 m)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eCoverage: \u003cul\u003e \u003cli\u003eHorizontal (fixed): 130° (-6 dB, averaged 1k to 4k Hz)\u003c\/li\u003e \u003cli\u003eVertical (adjustable): Defined by the DDS algorithm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eTypical throw: 50 m\u003c\/li\u003e \u003cli\u003eDynamic range: \u0026gt;100 dB\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eElectrical: \u003cul\u003e \u003cli\u003eInput: \u003cul\u003e \u003cli\u003eNominal level: 0 dBV (RMS, line input)\u003c\/li\u003e \u003cli\u003eMaximum level: +19 dBV (peak, line input)\u003c\/li\u003e \u003cli\u003eType: Dual line input, transformer balanced\u003c\/li\u003e \u003cli\u003eImpedance (balanced): 6k8 Ω\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eDSP module: \u003cul\u003e \u003cli\u003eType: Floating point 900 MFLOPS 32 bits\u003c\/li\u003e \u003cli\u003eMemory: 64 Mb SDRAM + 3 Mb non-volatile\u003c\/li\u003e \u003cli\u003eAD DA conversion: 24 bits sigma-delta 128x oversampling\u003c\/li\u003e \u003cli\u003eAuxiliary processor: 200 nsec single cycle RISC\u003c\/li\u003e \u003cli\u003eSample rate: 48.8 kHz (default)\u003c\/li\u003e \u003cli\u003eLatency: 3.7 ms\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eSignal processing: \u003cul\u003e \u003cli\u003e21 sec (pre-delay) + 2 x 10 sec (input channel delay)\u003c\/li\u003e \u003cli\u003eEqualizer and compensation filtering\u003c\/li\u003e \u003cli\u003eVolume control\u003c\/li\u003e \u003cli\u003eIndividual RMS and peak limiters on each output\u003c\/li\u003e \u003cli\u003eAmbient noise level dependent gain adaptation ('fail-safe')\u003c\/li\u003e \u003cli\u003eSixteen output filters + delay ring buffers\u003c\/li\u003e \u003cli\u003eDual input configuration\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eControl unit: \u003cul\u003e \u003cli\u003eNetwork interface type: Serial full-duplex RS-485, auto-switching 115k2, 57k6, 38k4, 19k2 baud, optically isolated\u003c\/li\u003e \u003cli\u003eMaximum number of units: 126 units\u003c\/li\u003e \u003cli\u003eRemote surveillance: \u003cul\u003e \u003cli\u003eGeneral status (DSP running, signal present etc.)\u003c\/li\u003e \u003cli\u003eAmplifier monitoring and load monitoring schemes\u003c\/li\u003e \u003cli\u003eExternal pilot tone detection (20k5 - 28k Hz, level \u0026gt;= -22 dBV)\u003c\/li\u003e \u003cli\u003eBuilt-in ambient noise microphone, override through external ambient mic\u003c\/li\u003e \u003cli\u003eFrost protection\u003c\/li\u003e \u003cli\u003eFan control for optional external fan (24 V DC \/ 3 W max.)\u003c\/li\u003e \u003cli\u003eThermal overload protection\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eFailure: \u003cul\u003e \u003cli\u003eInternal hardware bypass circuit\u003c\/li\u003e \u003cli\u003eFailure relay (external connector, maskable conditions) SPDT 100 mA \/ 24 V\u003c\/li\u003e \u003cli\u003eJumper configurable for volt-free or impedance-sensing (10k \/ 20k Ω) operation\u003c\/li\u003e \u003cli\u003eFailure status indicated at front by bi-colour LED\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003ePower amps: \u003cul\u003e \u003cli\u003eType: PWM (class D)\u003c\/li\u003e \u003cli\u003ePower: 16 x 40 W RMS (4 ohm)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eProtection: \u003cul\u003e \u003cli\u003eThermal shutdown if Tjunction \u0026gt; 150°C\u003c\/li\u003e \u003cli\u003eCurrent limiting output stage\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eConnectors: \u003cul\u003e \u003cli\u003eGeneral type: 5 mm pitch cage clamp (as WAGO series 231)\u003c\/li\u003e \u003cli\u003eAudio inputs: 6p male\u003c\/li\u003e \u003cli\u003eRS-485 interface: 5p male\u003c\/li\u003e \u003cli\u003eAmbient noise and temp sensor: 5p female\u003c\/li\u003e \u003cli\u003eFailure detect and fan control: 5p female\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003ePSU: \u003cul\u003e \u003cli\u003eMains: 3p IEC\u003c\/li\u003e \u003cli\u003eMains voltage (+5\/-10 %): 230 or 115 V\u003c\/li\u003e \u003cli\u003eMains fuse(s): 1 x 6.3 A (slow type)\u003c\/li\u003e \u003cli\u003ePower consumption: 84 VA (idle) \/ 407 VA (male speech STIPA) \/ 750 VA (full load)\u003c\/li\u003e \u003cli\u003ePower factor: 0.55 (idle) \/ 0.60 (full load)\u003c\/li\u003e \u003cli\u003eMax mains inrush current: 25 A short-time peak (@ 230 V)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eProtection: \u003cul\u003e \u003cli\u003eThermal protection\u003c\/li\u003e \u003cli\u003eOutput current limiting\u003c\/li\u003e \u003cli\u003eUnder-voltage lock out\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eGeneral: \u003cul\u003e \u003cli\u003eTemperature range (ambient): 0 to 40°C (32 - 104°F)\u003c\/li\u003e \u003cli\u003eTransducers: \u003cul\u003e \u003cli\u003e13 x 4\" full range\u003c\/li\u003e \u003cli\u003e8 x 1\" horn loaded dome tweeter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eDimensions (H x W x D): 4350 mm (171.3\") x 134 mm (5.3\") x 92 mm (3.6\")\u003c\/li\u003e \u003cli\u003eDefault colour: \u003cul\u003e \u003cli\u003eEnclosure and grill: RAL 9010 (white)\u003c\/li\u003e \u003cli\u003eSpeaker baffle: RAL 9011 (black)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eWeight: 35 kg (81 lbs)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eStandards: \u003cul\u003e \u003cli\u003eSafety: EN 62368-1:2014+A11:2017\u003c\/li\u003e \u003cli\u003eEMC: EN 55032:2012\/AC:2013 class A, EN 55103-2:2009\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"JBL Pro","offers":[{"title":"Default Title","offer_id":44958937874631,"sku":"IVX-587140","price":22600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/7917\/1271\/files\/IVX-587140_57f2d27d-aeab-4dad-be46-7dc10cce5ea8.jpg?v=1742043277","url":"https:\/\/wlsound.com\/products\/jbl-ivx-587140-intellivox-dsx430-column-speaker-with-16-channel-class-d-amplifier-amp-at-bottom","provider":"W\u0026L Sound Consulting","version":"1.0","type":"link"}